Calculators

The Integrity Stainless calculator tools are designed to help easily determine your common coil, sheet, and plate requirements.

Slit Coil
Sheet Weight
Plate Weight

Slit Coil

  • Specifications

  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Pounds)

  • Results

  • (Pounds)
  • (OD - Outside Diameter)
    (Inches)
  • (PIW - Pounds Per Inch Of Width)
    (Pounds/Inch)
  • (Feet)
  • This field is for validation purposes and should be left unchanged.

Sheet Weight

200 Series

200 Series Density Factor = 0.2840

Note: “Sheet” thickness max = 0.187″ (Cold Rolled)

  • Specifications

  • Please enter a number from 0 to 0.187.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)

  • Result

  • (Pounds)
  • This field is for validation purposes and should be left unchanged.
300 Series

300 Series Density Factor = 0.2916

Note: “Sheet” thickness max = 0.187″ (Cold Rolled)

  • Specifications

  • Please enter a number from 0 to 0.187.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)

  • Result

  • (Pounds)
  • This field is for validation purposes and should be left unchanged.
400 Series

400 Series Density Factor = 0.2860

Note: “Sheet” thickness max = 0.187″ (Cold Rolled)

  • Specifications

  • Please enter a number from 0 to 0.187.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)

  • Result

  • (Pounds)
  • This field is for validation purposes and should be left unchanged.

Plate Weight

Note: “Plate” thickness min = 0.187″ (Hot Rolled)

  • Specifications

  • (gauge = lbs per sqft)
  • Please enter a number greater than or equal to 0.
    (Inches)
  • Please enter a number greater than or equal to 0.
    (Inches)

  • Result

  • (Pounds)
  • This field is for validation purposes and should be left unchanged.

*These calculators are provided as a tool to aid the user. Integrity Stainless and Olympic Steel are not responsible for the accuracy of any calculations made using these calculators.